Powerdale Charger

To ensure a seamless connection between the Powerdale Charger and Smartmaster Pro, follow these recommended configuration steps. These settings optimize communication and ensure reliable performance for both the Advance and Cluster models.

Powerdale Advance Configuration

1. OCPP Version:

   • Powerdale Advance uses OCPP 1.5.

2. Karo Number:

   • Find the Karo number under Charge Box ID: NeXXtenderKaroXXXX.

3. IP Address:

   • Locate the IP address using the URL:
     https://[IP address]:9090/axis2/services/ChargePointService.

4. Modify Nexxtgem Parameters:

   • Adjust Nexxtgem parameters directly in the web app.

5. Additional Tip:

   • You can also download our configuration tips for detailed guidance.

Powerdale Cluster Configuration

1. Duplicate Clusters:

   • In the wizard, you can easily duplicate clusters for quick setup.

2. Communication Unit:

   • Use the same Communication Unit for all clusters connected to the same controller.

3. Phase Rotation:

   • Pay attention to phase rotation in the primary phase:
     • Cluster 1 => L1
     • Cluster 2 => L2
     • And so on...

4. Connector IDs for 16 Clusters:

   • Assign Connector IDs sequentially:
     • Cluster 1 = Connector ID 1
     • Cluster 16 = Connector ID 16

5. OCPP Version:

   • Powerdale Cluster uses OCPP 1.5.

6. IP Address for Each Controller:

   • Find the IP address using the URL:
     https://[IP address]:9090/axis2/services/ChargePointService.

7. Controller Number:

   • Locate the Controller Number under Charge Box ID:
     NexxtenderCluster-XXXXX-XX-XXXX-XXXXX.

These configurations ensure stable integration between Powerdale Chargers and Smartmaster Pro. Proper assignment of Connector IDs and phase rotations is crucial for efficient cluster management.